|
|
Asking Price
|
Condition
|
SOLD! (Best Offer)
|
New
|
|
|
|
|
Description:
|
The Altitude Wakeboard Tower is an excellent choice when you are looking for a wakeboard tower to enhance the look and value of your boat. This tower is a universal tower that can be sold at a lower price than custom towers becasue they can be produced at a high volume. However, this lower price and mass production does not equate to a lower quality tower. The Altitude Wakeboard Tower is made of high quality 6061-T6 polished aluminum. That is the same material that airplanes are made of. Not only is this tower built with a strong material but it is built huge as well. Each leg of the tower as well as the bottom crossbar is 2.25" in diameter. The top crossbar section is even bigger with 2.5" diameter tubing. Can you say STRONG? The universal design allows the tower to fit on boats with a beam anywhere between 76 inches and 108 inches. The swivel joints allow the tower to mount at any angle. Therefore, you have to option to have the tower mount on the top of your boat or on the side of your boat. This gives the Altitude Tower a more of a universal fit than other towers. If you are thinking about putting a tower on your boat then the Altitude Tower will fit. The tower was also designed to collapse down below the windshield. Unlike other towers that awkwardly fold up on to the bow of the boat, the Altitude tower conveniently folds back into the boat. The strength, look, universability, function, and affordability of the Altitude Wakeboard Tower make it the best choice for a wakeboard tower hands down. If you are looking to get more air on your board the Altitude Wakeboard tower will take you there, and help you reach a higher altitude than you thought possible.
|
Brand:
|
Altitude
|
|
|
|
|
|
|
|
Sun | Mon |
Tue | Wed |
Thu | Fri |
Sat | | | | | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 |
|
2011 Z1 Tige' Boat Tower surfup
|
|
|